Slice Mosquito Assembly Jig

Assembly and disassembly jig for the Slice Engineering Mosquito and Mosquito Magnum hotends.This keeps everything aligned when you're torqueing the heat break bushing onto (and off of) the hot block. It fits both regular Mosquito and Mosquito Magnum, with the thermistor, heater cartridge, and retaining screws removed.The STL is designed for a socket with a 13mm outer diameter, give or take; if yours is much larger (or smaller), use the OpenSCAD and the .scad file to generate a new STL. If you need to work on a Mosquito with the thermistor, heater, and/or retaining screws in place, you'll need to modify the STL (or do a lot of scad redesign).An added benefit is that you can grab the jig with pliers to hold it in place as you torque, instead of having to grab the hotend itself and risk scratching it up. I do recommend pliers as I found it difficult to keep it from turning as I applied the 4 Nm of torque, which is actually a fair amount of force.Tip: when tightening to a specific torque,