Thingiverse
Slide Rule
di codemonky
32
Download
22
Likes
0
Makes
A very simple slide rule design.
The upper slide is also the lower slide. It uses 4-40 screws (3 mm).
The cursor upper and lower support are to be tapped for #2-56 screws. Three screws per each, with the middle on one side and the other two on the other side.
The reticle is 0.030" clear PET. You may want to countersink the screws.
I'm still working on a plotter fixture to draw the lines using fine drafting pens.
Printed in PLA.
The upper slide is also the lower slide. It uses 4-40 screws (3 mm).
The cursor upper and lower support are to be tapped for #2-56 screws. Three screws per each, with the middle on one side and the other two on the other side.
The reticle is 0.030" clear PET. You may want to countersink the screws.
I'm still working on a plotter fixture to draw the lines using fine drafting pens.
Printed in PLA.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!