Thingiverse

Slide Vise

by Air3lax

42 Downloads

19 Likes

0 Makes

I needed a small vise so I designed one.
The block is freely displaceable and is locked by the two levers. In the block is a small drawer integrated, on top of it are two small recesses for magnets to hold a small tool or screws, there are also three small compartments for screws or other small things.

You need screws of the size M3 with cylinder head for the construction.

2 x 20mm for the sled
2 x 20mm for the levers
2 x 8mm for the stopper
2 x 8x3mm magnets

All .stl files already have the correct orientation for printing. Support material is not needed.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Ich brauchte einen kleinen Schraubstock also habe ich einen entworfen.
Der Block ist frei verschieblich und wird über die beiden Hebel arretiert.
Im Block ist eine kleine Schublade integriert, oben drauf sind zwei kleine Aussparungen für Magnete um ein kleines Werkzeug zu halten oder Schrauben, außerdem gibt es noch drei kleine Fächer für Schrau

design drawer dritte hand fusion 360 handle hebel Magnets Schraubstock slide vise solder soldering third hand tool vise design drawer dritte hand fusion 360 handle hebel Magnets Schraubstock slide vise solder soldering third hand tool vise

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format