滑盖小盒子 Sliding-Top Small Box

>> 模型介绍 | Model Introduction >>>>>>>>| > 灵感来源 Source of Inspiration​​最近换了一个叫温致的HNB，与IUO最大的区别就是多了一个能装滤芯的嘴。所以做了一个小盒子来装这些小滤芯。🤣I recently switched to a HNB device called Wenzhi. The biggest difference from IUO is that it comes with an additional mouthpiece that can hold filter cartridges. That’s why I designed this small box to store these tiny filters.| > 见仁见智 Multifaceted Perspectives​​是否适用于其他场景，请根据模型规格自行判断。Suitability for additional applications should be self-assessed based on the model specifications.| > 模型规格 Model Specifications​详细规格请参阅下载页的打印配置说明。For detailed specifications, refer to the print configuration description on the download page.>> 切片设置 | ​​Slice Settings​ >>>>>>>>| > 仅供参考，按需调整 For reference only; Customize as needed| 耗材 Filament：PLA| 层高 Layer Height > 层高 Layer height：0.2mm > 首层层高 First layer height：0.2mm| 墙壁和表面 Walls and surfaces > 墙顺序 Walls printing order：外墙/内墙 Outer/Inner| 墙 Walls > 墙层数 Wall loops：2| 填充 Infill > 稀疏填充密度 Sparse infill density：15% > 稀疏填充图案 Sparse infill pattern：网格 Grid| 支撑 Support > 开启支撑 Enable support：需要 Required > 类型 Type：树状(自动) Tree(Auto) > 阈值角度 Threshold Angle：25°| 高级 Advanced > 顶部Z距离 Top Z distance：0.16mm > 顶部接触面层数 Top interface layers：4 层 layers > 支撑/模型xy间距 Support/object xy distance：2mm| 筏层 Raft：无 NONE| 轮廓圈 Skirt > 轮廓圈类型 Skirt type：组合 Combined > 轮廓圈数 Skirt loops：1>> 组装说明 | Assembly Instructions >>>>>>>>即打即用，无需组装。Print-Ready / Assembly-Free​>> 其他说明 | Additional Notes >>>>>>>>1.模型使用 Blender 4.5.2 LTS制作。The model was created using Blender 4.5.2 LTS.2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。You are free to modify it to your desired style as needed under the CC BY-NC-SA 4.0 license.3. 无论如何，遇见是缘分，适用是幸会。欢迎点赞或收藏，感谢关注和助力。​​Regardless, it’s serendipity to meet, and a delight to be useful. Likes, favorites, follows, and support are all greatly appreciated!4. 百因必有果，打印不好别找我。即便