Slightly Taller Qidi Q2 Riser

An issue with the Qidi Q2 is that the internal PTFE filament tube rubs against the underside of the glass lid. Even worse, it scrapes across the screw heads which hold the lid's handle in place. A common solution is to print a riser for the glass lid. The original riser is posted on Qidi's public website created by "QIDI User". It was uploaded to Printables (here) by Studio 507. It has adjustable baffles to vent (cool) the chamber in the case of low-glass-transition filaments such as PLA, PETG, and TPU. It fits great, looks great, and the model's tolerances are excellent. But even with that riser I was having the PTFE tube rub against the glass lid. Especially after I installed this (incredibly useful) PTFE Clip from LittleApollo! So I decided to make the riser even taller. I extended the height from 33mm to ~50mm. Also, the location of the vent openings seemed a bit low to me so I moved them upwards towards the centerline. I printed mine in the Q2 itself, with Qidi's PETG Basic filame