Thingiverse
Slim Desiccant Box
by JGlass
19
Downloads
10
Likes
0
Makes
This is a long and low desiccant box with a lid to fit in the bottom of a filament drybox, with a lid to help prevent spillage and dropping tools into the desiccant.
Dimensions are approximately 120mm x 40mm x 25mm. Tolerance on the lid is about 0.2mm between the inner lip of the lid and the outside of the box - if your printer has less accuracy than this, some post-processing may be necessary. Uses about 38g of PLA at %100 scale.
Dimensions are approximately 120mm x 40mm x 25mm. Tolerance on the lid is about 0.2mm between the inner lip of the lid and the outside of the box - if your printer has less accuracy than this, some post-processing may be necessary. Uses about 38g of PLA at %100 scale.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![Rectangular Humidity Sensor Mod for AMS Desiccant Box / Silica Gel Container [HYGROMETER]](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSfe5fc6af321276%2Fdesign%2F2023-11-22_6cf3ac646077a.jpg&w=400&h=300)
![[w. suction cup] Desiccant Container](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F55%2F5b%2F15%2F7b%2Fd0%2Flarge_display_3bb188f0-8c4d-4895-bf6b-bfc08d341e43.jpg&w=400&h=300)
