Slicer Discord
SLink Cable Caddy – 3D-Druckmodell von MakerWorld MakerWorld
Gadgets

SLink Cable Caddy

0 Downloads
0 Likes
0 Makes
Zum Modell
This is a cable reel for your StarLink cable. It is designed to be mounted to the solar panel bracket on top of a Brinkley RV, but with some washers, you can mount it anywhere you want. These are the bolts I used for bolting it together; they are 1/4-20 in. x 3 in. Hex Bolts. You need 2 bolts total. You will also need 2 of These Nylock Nuts. If you are mounting it to your solar panel, it uses the existing hardware from the bracket, just take the bolts out, then put them back in with the mounting plate.
Kategorie
Gadgets
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen