Sloffies(Slides)

Sloffies or plakkies are what we call flip-flops/slides in Afrikaans, my language.   I have included a photo with a size chart. I have included files to print your own packaging for your Sloffies. I printed the Sloffies and straps with eSUN 95a TPU and the packaging with PLA. I have included a test_print file you can slice to test the correct Infill Density for your TPU. I have included a sloffies_strap openSCAD file you can use to customize the strap to fit. Sloffies Sole print settings Layer Height: 0.2 Infill Pattern: Gyroid Infill Density: 3 - 10%(Personal preference) Wall Line Count: 0 Top Layers: 10 Bottom Layers: 10  Sloffies Strap print settings Layer Height: 0.2 Infill Density: 15% Wall Line Count: 2 Top Layers: 4 Bottom Layers: 4 Packing bottom print settings Layer Height: 0.2 Infill Density: 10% Wall Line Count: 3 Top Layers: 6 Bottom Layers: 4 Support Overhang Angle: 60 Support Placement: Everywhere Support Density: 0.3% Support Z Distance: 0.1 Packing top print settings Layer Height: 0.2 Infill Density: 10% Wall Line Count: 2 Top Layers: 4 Bottom Layers: 6 Packing insert print settings Layer Height: 0.15 Infill Pattern: Gyroid Infill Density: 15% Combing: Off   The included sizes are EU 39, 40, 41, 42, 43, 44.   When printing the Sloffies Sole, print on a textured bed to avoid the smooth bottom surface you get when printing on a glass bed.  When done printing, glue the Sloffies Strap into the grooves in the Sloffies Sole. Thank you for supporting my design. I really appreciate it.