Small coffin smoothing plane

This is the prototype for a small (4 inch) coffin shaped wood working smoothing plane. As this is a prototype, the tolerances are tight.

There are two models: One for all parts (to check assembly) and one for easier printing and assembly. The all-parts model will try your patience.

The bed angle is 55 degrees.

The "real" plane will be made from metal with the sides dovetailed on. The sole will be steel and sides will be steel or brass. The blade spine will be welded on.

Note: The planes in the photos have had an hour or so of sanding on the sides and lever cap.

###To assemble the plane you will need:
- 1/8" drill
- \#30 (0.1285") drill bit (optional)
- Hand chuck to hold drill so you can ream holes without power.
- 1/4"-20 tap (maybe). I tap. You might be able to use a bolt to clean the thread.
- 1/4"-20 die (probably not), a nut will work to clean the thread.

- 1/8" rod, 1.36" long (I use welding rod). Steel or brass.

- Glue, such as "super" (CA) or ho