Small Divided Tackle Box

This is a Small Divided Tackle box. It is similar to my other design, only now you have more options with compartment sizes! Print the base and lid, then print as many dividers as you need and customize it according to your needs.
It can be printed without any support, and does not require any pins or hinge parts to assemble. It just snaps together!
It can be scaled up or down, but be wary of loosening tolerances when scaling up.
Use your normal print settings for PLA or ABS, but I recommend printing slowly around 35-50mm/s for best quality. Especially on the dividers. Also, I recommend using ABS or PETG for strength in case the box is dropped. Enjoy!