Thingiverse
Small kite cross
von dpruim
61
Downloads
50
Likes
0
Makes
**Kite Cross**
A small cross to build a small kite upon.... it worked for me, i used barbeque sticks.
The measurements i used are in one of the drawings, but i don't think it is critical.
Flew nicely in a light wind..
---
In my case, small supports were printed inside the holes. so i drilled them open with a 3mm drill..
---
A small cross to build a small kite upon.... it worked for me, i used barbeque sticks.
The measurements i used are in one of the drawings, but i don't think it is critical.
Flew nicely in a light wind..
---
In my case, small supports were printed inside the holes. so i drilled them open with a 3mm drill..
---
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!