Thingiverse
Small Retractable Drip Tray
von PatrickPaes
91
Downloads
60
Likes
0
Makes
This drip tray will slide to your fridge shelf. This one is specifically made for Whirlpool WRT318FZDM.
Print using 0.2 layer height. Rails.stl has already a support piece, remove it and carefully move the spring so it separates from the layer below. Just the center of the spring is fixed to the bottom layers.
If you have another type of self, simply edit Shelf_Profile.stl to the desired shelf profile.
Rails.stl needs to be glued to Shelf_Profile as the picture shows.
Print using 0.2 layer height. Rails.stl has already a support piece, remove it and carefully move the spring so it separates from the layer below. Just the center of the spring is fixed to the bottom layers.
If you have another type of self, simply edit Shelf_Profile.stl to the desired shelf profile.
Rails.stl needs to be glued to Shelf_Profile as the picture shows.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
