Thingiverse
Small Shelf
von we_print_4_fun
1
Downloads
6
Likes
0
Makes
I was in need of a small shelf by the entry for my car keys, so decided to give it a go. Here's what I came up with. Pretty simple, but gets the job done.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
Overall dimensions are 200mm x 100mm x 90mm or approx. 8in wide x 4 in deep x 3.5in tall.
It is designed to use 2 medium sized Command picture hanging strips, velcro-style. Similar to this: https://a.co/d/07B24eQP
Settings for my print:
PLA
.20mm layer height
10% Infill
Supports - I chose to have them on, but you may be able to get away with them off.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
