Small shoehorn with hook

A small shoehorn with a wall mounted hook for convienient placement. A must have for every entryway as the shoehorn makes it easier to put shoes on and prevents your shoes heels from bending and deforming over time, and the hook is an easy way to store it just in reach for when you are going outside. Filament usage: I used ABS, but any filament should work fine. Just bear in mind that for more easily breakable and bendable filaments, the infill density of the shoehorn should be set a bit higher. The shoehorn uses about 16 grams of ABS (this may vary from filament to filament) and the hook (all parts together) use about 34 grams of ABS (again this may vary slightly from filament to filament) Brim and supports: Yes. You can cut the hook cover and hook base vertically along the T shape and T shape cutout, and assemble them afterwards, but i don't recommend it since you have to be very precise and assemble them just right and it may create weak points. Screws for mounting the hook. I used two 30 * 7 mm flat head screws, but slightly different sized ones will probably work just fine to. Just make sure that the screws are long enough to properly secure them to the wall.