Small Vault (4 numbers combination)

This vault is a small 4 number combination vault. Once the correct combination is put in, the latches automatically retract. No glue or any hardware is required to build this vault. Boost MeSupport me by Boosting my desings! Thanks for choosing my desing, hope you like it! Assembly instruction: Make sure you have printed all the pieces. Join two discs together with filament and trim the excess off (x2). On the back plate of the door, insert the bottom latch, the top latch and 3 discs starting with a thick disc followed by the 2 made just before. On the front plate of the door, insert the “U” shaped ornament by sliding it sideways. Insert the knob, the roulette and its’ center. On the other side of the front plate fix the roulette with the biggest retaining ring and insert the fitting disc. Insert the gear and fix it with some filament, then trim it off. Put the two parts of the door together. On the back of the door, the small hole allows you to lock the door and find the combination t