Thingiverse
Smart Effector - Air Pump tubes attachments
von Elescar
10
Downloads
4
Likes
0
Makes
Smart Effector adapter to attach the tubes from a Berd Air Pump.
__Required parts:__
- 3x M2.5 screws, there is 2 holes but only 1 is required, use the 2nd is the thread on the first one is failing - only needs little pressure on the pipes
- Pipe (brass) outer diameter: 2.5mm
- Plastic tube inner diameter:5mm
__Print settings:__
- ABS+ at .2 layer height
__Required parts:__
- 3x M2.5 screws, there is 2 holes but only 1 is required, use the 2nd is the thread on the first one is failing - only needs little pressure on the pipes
- Pipe (brass) outer diameter: 2.5mm
- Plastic tube inner diameter:5mm
__Print settings:__
- ABS+ at .2 layer height
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!