Thingiverse
Smart-Jet Wallet
10
Downloads
16
Likes
1
Makes
Remix of AndrewCarson's JetWallet and Smart Wallet-v1.0 by b03tz printed using a Prusa MK3S+. I wanted the flip top of the JetWallet along with the fanned-out cards of the Smart Wallet. I sized up the dimensions about 10% to allow extra space for the lever and make sure the cards did not get stuck. Currently, the wallet holds 8 cards/IDs and could hold up to 10, but the lever may not work at with all 10.
I have included the .stl that has all of the components and extra bits if you need to modify things. I have also included the .obj and .mtl if you want to edit further. The snap top is pretty firm and will need some breaking in to use one-handed.
*IMPORTANT*
Print the lever piece with the flat side down to avoid messing up the steps. When installing the lever, it needs a good pop to get in. I wedged it in place then had to push it down firmly on the tabletop to snap it into place.
This is the first remix that I have posted. I hope it is helpful to everyone!
Smart Walle
I have included the .stl that has all of the components and extra bits if you need to modify things. I have also included the .obj and .mtl if you want to edit further. The snap top is pretty firm and will need some breaking in to use one-handed.
*IMPORTANT*
Print the lever piece with the flat side down to avoid messing up the steps. When installing the lever, it needs a good pop to get in. I wedged it in place then had to push it down firmly on the tabletop to snap it into place.
This is the first remix that I have posted. I hope it is helpful to everyone!
Smart Walle
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!