Smartphone Stand #7 (flexible angle)

This is just one of the structural ideas for a smartphone stand.
YouTube: https://youtu.be/e6VofNe4jxI (The stand in the video is a bit older.)

There are three types of hinge gap widths as files. It is recommended to print "hinge_gap_test.stl" first to determine which gap is appropriate.

smartphone_stand_gap02.stl ... gap width = 0.2mm
smartphone_stand_gap03.stl ... gap width = 0.3mm
smartphone_stand_gap04.stl ... gap width = 0.4mm

[size when folded]
height:40mm, thickness:9.15mm, length:83.5mm

[screws to use]
M4 CAP bolt 25mm + spring washer + 10mmWasher x3 .. refer to the photo
No nuts needed.
It is recommended to use glue to prevent the screws from loosening.


[print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PLA
-support: no
-brim: no
-raft: doesn't matter
-print directions: Please refer to the photo

[revisions]
2022/04/12
I made a detailed design change.

2022/04/11
I made a detailed design change.

2022/04/1