Smeg Dishwasher Wheel

For the upper drawer - one of mine split and fell off making the drawer wobble badly and sag - used the remaining one to model this. Dimensions are the same as stock except the shaft hole as the plastic shaft on the drawer is worn down so the stock 10mm size falls off. Printed on a Bambu Lab P1S with a fresh calibration, the shaft hole dimensioned at 9.8mm comes out at 9.6mm which still rolls but is slightly tighter on the shaft to account for the wear. I have also included a version sized at 10mm which came out at 9.8mm is yours is not worn.

Print with supports

I printed in ABS for heat resistance but PP would be best as that is what the factory parts are made of in my case