Snake Eye's

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 185x242.11mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.7mm and the Actual Depth is 2.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Red At layer #16 (1.36mm) swap to Blue Gray At layer #18 (1.52mm) swap to Ash Gray At layer #20 (1.68mm) swap to White for the rest.