Snake HueForge

Project: Schlangen WeißPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100.16x178mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 7.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique