Snaply - Push-Button Filament Spool Clip

Introducing SNAPLY – The Push-Button Filament Spool Clip!There is certainly a wide range of filament clips available on Makerworld. In this area, SNAPLY stands out with its one-of-a-kind Press-to-Release technology. With the push of a button, Snaply allows you to secure your filament on unused spools securely and easily.⠀⠀Press-to-Release SystemPressing down on the spring-loaded button causes the Snaply clip to lock and unlock. When the button is pressed, the filament experiences no resistance and can slide in and out of the tunnel easily. When the button is released, the filament is clamped tightly by the Snaply clip.⠀⠀⠀AssemblyThe Snaply Clip is compatible with most pen springs between 3.2mm - 5.7mm in diameter and about 10mm - 30mm in length. It prints in three parts with no supports, and can be easily assembled by pressing the piston into the casing.⠀<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001907134/de