Snapmaker 2.0 - Another SBR16 mount set

Designed my own mounts because I had some confusion on other versions: would the screw-type ones work on this device? Which block worked from the other version?

I noticed that my two linear rails were different heights and was planning to shim one, but the base plate varied by more than this amount, so I decided to use the height of these supports to achieve a level bed. The goal was to ensure the plate could support 3d printing (which I've never tried on this machine). When I started, there was a 0.51mm variance on the XY axis, which would have likely precluded proper first layer adhesion. Through the use of assorted spacers, I was able to reduce this to 0.04mm which should support proper print adhesion with only minor first layer squish.

I recommend printing four of the 2.0 lowers, then assessing if you need taller or shorter ones. My printer used 1.9, 2.2, 2.2, 2.5 so who the heck knows what you need? (put it in the comments if you use this)

My SBR16 rails, at the time of t