Snapmaker 2.0 Enclosure Filter Box

After seeing the price of the filter made by Snapmaker I decided to make my own. This filter will connect to the hose provided by the enclosure for the v2.0 350 model. I used 2 HEPA filters which I sourced from Amazon. I wanted to make sure there was enough filter area so the fan would not have any issues moving air.

Filter : https://www.amazon.com/gp/product/B09F35YND3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I built this so I could us the laser attachment indoors without stinking up the room.

The top is actually about 1.0mm out of compliance. I originally was going to use a couple large rubber bands to hold it together, but I decide to cram the top on and it stays without any issues. Taking back apart to replace filters will probably be a little challenging.