Tools
Zum Modell
Snapmaker 2.0 Linear Rail Guide Adapter
280
Downloads
144
Likes
3
Makes
Adapters to connect the Snapmaker bed frame to the linear rail guide supports.
This upgrade adds supports at the front and back corners of the bed frame to prevent bending down during actions at the limits of the vertical axis
Version 4 will fit the new design for the metal bedframe.
Holes spacing on the bearings is not square so to prepare this for printing mirror it in your slicer.
1x normal
1x Mirrored about the vertical axis
1x Mirrored about the horizontal axis
1x Mirrored about both the vertical and horizontal axis
I was not able to match rails with pre existing files for this application so I made my own and the link for the rails used is provided below.
OrangeA SBR Linear Rail 16-800mm
https://www.amazon.com/gp/product/B07D9JRPG9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
This upgrade adds supports at the front and back corners of the bed frame to prevent bending down during actions at the limits of the vertical axis
Version 4 will fit the new design for the metal bedframe.
Holes spacing on the bearings is not square so to prepare this for printing mirror it in your slicer.
1x normal
1x Mirrored about the vertical axis
1x Mirrored about the horizontal axis
1x Mirrored about both the vertical and horizontal axis
I was not able to match rails with pre existing files for this application so I made my own and the link for the rails used is provided below.
OrangeA SBR Linear Rail 16-800mm
https://www.amazon.com/gp/product/B07D9JRPG9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!