Snapmaker 2.0 Linear Rail Guide Adapter

I adapted the adapter plate V4 for the new A350 bed from 3Dnate (many thanks at this point) to my circumstances.

Linear Guides from: https://www.vevor.de/linearfuehrung-c_10531/sbr16-800mm-linearfuehrung-linear-4-block-steifigkeit-einzigartig-lagerblock-p_010569305052

1. Height shortened to 16mm (original 17.25mm)

2. the hole on the outside corners, which was not continuous in the original, with a hole for
a longer M4 countersunk screw + lower recess for an M4 nut -
With this I was able to gently pull down my platform, which was very arched at the corners, through the heated bed,
because it kept coming loose from the adapters in the Z+ direction at the corners

3. I left 1 file at its original height for mirroring and shortening.
(mirrored see https://www.thingiverse.com/thing:4860729)