Snapmaker 2.0 wasteboard holder

I design this for the snapmaker waste board to sit on top of the heated bed as a quick change adapter.

You will need to drill 8 holes at the side of the waste board for the holder. The files are for one side only, you will need to mirror them in your slicer for the other side. The rear are the one will the extra bottom hook to allow the board to be slided into the heated bed.

You will need to mark the holes with the waste board on top of the heated bed before drill.

*** Use this on your own risk, if the cnc job hits the material or the waste board it might push the waste board out.

You can remove 2 screws from the heated bed and get a longer screw to go through the waste board and heated bed to secure it to the base platform.