Snapmaker ray enclosure camera jig

I bought Lightburn software and the 8MP LightBurn Camera (4K-W), which I want to use together with the Snapmaker Ray 40. I had originally planned to mount it in the lid of the enclosure but I think it was too wobbly. After some brainstorming, I came up with this solution with a hinged camera stand that can be tilted up when you want to take a "picture" of what is on the work table. BOM:8 EA DIN 7991 M3 x 6 (for mounting the 3D printed parts to the aluminum square tubing.)2 EA DIN 912 M4x15 (For connecting frame hinge point to 10x10_pivoit angle left and right.)2 EA DIN934 M4 Nut (For connecting frame hinge point to 10x10_pivoit angle left and right.)4 EA DIN7991 M4 x 15 (for connecting 10x10_pivoit angle left and right to frame.)4 EA DIN125 M4 washer (for connecting 10x10_pivoit angle left and right to frame.)2 EA 626ZZ ball bearing (For connecting frame hinge point to 10x10_pivoit angle left and right.)2EA 10x10 1,5 WT 216 mm long aluminum square tubing.1 EA 10x10 1,5 WT 905 mm long a