Snapmaker U1 cover

The printer cover is composed of 10 printed elements, which are assembled using 3x16 screws or glued together. 2mm clear Plexiglas is required to fill the walls. The back wall is made of 3mm soft PVC. It can also be made of Plexiglas, but the groove in the modules is for a 3mm board. The front door opens on acrylic hinges attached with double-sided tape. I placed a thermometer and hygrometer in the front door, and an 80x80mm fan powered by USB on the back wall. I glued a narrow white window seal between the case and the printer. It's best to measure the Plexiglas dimensions after the case is assembled. I'm not providing dimensions because I made several changes to the original design and the board dimensions have changed. I printed the structural elements on a different printer, so some imperfections are visible. My main concern was to quieten the printer, as it's quite loud. I'd estimate the noise reduction was about 50%. Here you can modify the construction elements b