Snapmaker U1 Toolbox Tray

Model on OnShape: https://cad.onshape.com/documents/4e3090b46d9b709aea63f673/v/b97632534c31523e887014c7/e/ff16d7d87dbe54cd935d3aec I printed the model with black PETG. The model needs to be placed at 45 degrees angle to fit. 10% infill grid. 2 bottom shells 4 top shells Actual print time was 2h 35m 35s. Use the screws from from the Z axis that you removed while you unboxed the printed to hold the tray. Printables refuse to accept the gcode I printed so I compressed it and uploaded it as "Other Files"