SNES Super Mario World Map

HueForge image of the Super Mario World Map for the Super Nintendo Entertainment System (SNES). HueForge NotesSingle AMS Instructions Load the initial slots as follows:BlackBlueWhiteBrownWhen sending to the printer, assign the remaining colors to print from these slots:Dark Brown - Slot 2 (Blue)Green - Slot 2 (Blue)Red - Slot 2 (Blue)Yellow - Slot 4 (Brown)Now bear with me on this part. If you're using my sliced print profile, I have set three pauses. For each pause do the following:Pause 1 (Layer 8) - Unload Blue from Slot 2 and load Dark Brown, then resume the printPause 2 (Layer 15) - Unload Dark Brown from Slot 2 and load Green, then resume the printPause 3 (Layer 27) - Unload Green from Slot 2 and load Red, unload Brown from Slot 4 and load Yellow, then resume the print to finishIf you have two AMS, just load as normal and you may remove my pauses when slicing. HueForge Description Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x2