Snow Raven

Snow Raven Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Gray At layer #12 (1.04mm) swap to Ash Gray At layer #18 (1.52mm) swap to Ivory White for the rest.