Thingiverse
Snowboard Hanger, Adjustable Width
door ThinkBomb
52
Downloads
41
Likes
0
Makes
Mount your snowboard in the vertical position, nearly flat against the wall.
Watch the Demo Build here: https://youtu.be/WGEDDWCxds0
1- Mounts with two screws into the same stud in the wall.
2- Adjust it to the width you want (between 8 and 12 inches), then lock it down
3- Stoppers pivot to fit your boards edge angle.
All the screws anchor into #8-32 jam nuts in the base.
You will need the following hardware:
(5) #8-32 hex jam nuts (1/8" thick x 11/32 across flats https://www.mcmaster.com/90480A009/
(3) #8-32 Button Head Socket Cap Screws x 5/8" Long https://www.mcmaster.com/92949A196/
(2) #8-32 Button Head Socket Head Cap Screws x 1" Long https://www.mcmaster.com/92949A199/
(2) #10 Dry wall or wood panel screws, 2" Long (minimum), with 82° head. Https://www.mcmaster.com/90294A301/
Use stainless steel fasteners if you want to avoid corrosion, but I like the look of the Black Oxide steel screws because the heads blend in with the black print color.
All screws
Watch the Demo Build here: https://youtu.be/WGEDDWCxds0
1- Mounts with two screws into the same stud in the wall.
2- Adjust it to the width you want (between 8 and 12 inches), then lock it down
3- Stoppers pivot to fit your boards edge angle.
All the screws anchor into #8-32 jam nuts in the base.
You will need the following hardware:
(5) #8-32 hex jam nuts (1/8" thick x 11/32 across flats https://www.mcmaster.com/90480A009/
(3) #8-32 Button Head Socket Cap Screws x 5/8" Long https://www.mcmaster.com/92949A196/
(2) #8-32 Button Head Socket Head Cap Screws x 1" Long https://www.mcmaster.com/92949A199/
(2) #10 Dry wall or wood panel screws, 2" Long (minimum), with 82° head. Https://www.mcmaster.com/90294A301/
Use stainless steel fasteners if you want to avoid corrosion, but I like the look of the Black Oxide steel screws because the heads blend in with the black print color.
All screws
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
