Snowflake Earrings

My wife began asking that I design earrings for her and her friends. so I have created about 50 designs that I will slowly upload - so be on the lookout for new designs! Most can be printed with a .4 nozzle but for extra detail you may want to consider a .2 nozzle. I have printed these successfully on my P1S and A1 Mini. You will need earring hardware - i use the following kit from Amazon -- https://www.amazon.com/gp/product/B09YV65J75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 44.97x50mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Pink Transmission Distance: 8PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:Start with Ic