Thingiverse
Snowflake Ornaments
16
Descargas
18
Likes
0
Makes
Let it snow! This is your iconic 6-point snowflake ornament. One is more pointy, and the other is more round. Print whatever shape you like best and decorate your tree this Christmas season!
Instructions:
Print in clear filament for best results. Use 20% infill and avoid complex patterns as they scatter light more (unless that's what you want). A more simple pattern results in a clearer print. Use 0.2 mm layer height and a temperature of around 215-220 degrees C.
If you scale it, scale in the X and Y direction, but leave the Z at 4mm unless you need it to be a specific thickness. Thinner is more clear.
Instructions:
Print in clear filament for best results. Use 20% infill and avoid complex patterns as they scatter light more (unless that's what you want). A more simple pattern results in a clearer print. Use 0.2 mm layer height and a temperature of around 215-220 degrees C.
If you scale it, scale in the X and Y direction, but leave the Z at 4mm unless you need it to be a specific thickness. Thinner is more clear.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!