Soap Bar Dish

My take on a soap bar dish. It has a spout and the bottom is at a slight angle so excess water can run off. Also the soap sits on top of the elevated squares to dry easier.

To print it I used supports to slice it at an angle that would allow the inside bottom to be a flat surface. The flat inside bottom allows the water to run off better. It is also modeled this way, so the slicer (I used Prusa Slicer) should bring it up correctly.

I've modeled this in Onshape, check out this link to the original model:
https://cad.onshape.com/documents/45a84e192c0fc04b8b8afeb3/w/6dccd3c1723b3732f00b04ee/e/aab417d7f4a40f58d429c0b4?renderMode=0&uiState=649d8a9db2b76737fcba07a1