Soap Cutter

Soap Cutter using Guitar string for the wire cutter and a Ukulele Tuning Peg for the tensioner (see Amazon Links below). The arm and table A which has the arm hinge were both filled at 25 to give strength.

The arm uses an insert and pegs to assemble. The arm is attached using a 1/4 X2 5/8-inch clevis pin purchased at the local hardware store.

The table is doweled together to keep table portion lined up and then screwed from the bottom.

The locking knob for the gauge stop uses a 5/16 x 5 1/2 hex bolt and there is a cutout inside table A gauge bar opening to capture a 5/16 nut so that the handle can tighten the gauge bar.

the only part I used supports was on Arm B.


D'Addario PL011-5 Plain Steel Guitar Single String, .011 5-pack
https://www.amazon.com/dp/B00075XB04?psc=1&ref=ppx_yo2_dt_b_product_details

IKN White Ukulele Tuning Pegs Pin Machines Tuners Pack of 4
https://www.amazon.com/dp/B00ZPGFREI?ref=ppx_yo2_dt_b_product_details&th=1