Thingiverse
Soap mold Spiderman
door Ashak1el
4
Downloads
10
Likes
0
Makes
1) The mold consists of 4 parts and is assembled using 4 bolts and nuts M6. You can use printed ones, strong tightening is not necessary.
2) Before pouring melted soap, grease all parts of the mold well with Vaseline or another release agent.
3) When you assemble the mold, seal it with tape around the perimeter on all sides except the top part with the hole.
4) If the soap shrinks after hardening and a recess forms at the pouring point, simply add more melted soap into it.
2) Before pouring melted soap, grease all parts of the mold well with Vaseline or another release agent.
3) When you assemble the mold, seal it with tape around the perimeter on all sides except the top part with the hole.
4) If the soap shrinks after hardening and a recess forms at the pouring point, simply add more melted soap into it.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
