Socket Holder Trays (Imperial)

Imperial (inches) Socket organizers for deep and regular sockets in three drive sizes. These will fit together in a 19 inch tool drawer. The holes are generally a littler larger to accommodate different socket brands. I used Craftsman, Husky, and Kobalt for most of the sizing. These holders can be vertical or horizontal as the labels can be glued in either direction. The label slots are designed for an 18x9 label and can be glued in. There are some snap fit labels for gridfinity socket holders that work with these.The trays are large and will take up the full print surface on an X1 Carbon. Be sure you have enough room for all of the trays to fit together. They do not lock together but have alignment tabs that will work with each size.All trays were printed with PLA Matte.Tray sizes are 4 Row 1/2 Inch = 209x244mm 3 Row 1/2 Inch = 167x244mm2 Row 1/2 Inch = 125x244mm2 Row Impact = 111x244mm4 Row 3/8 Inch = 185x244mm3 Row 3/8 Inch = 142x244mm2 Row 3/8 Inch = 105x244mm3 Row 1/4 Inch = 103x2