Thingiverse
SocketWrench 1/4" 13mm
by Lote_VR
13
Downloads
9
Likes
0
Makes
This Item was printed in: REAL-Filament's White PLA ø2.85.
Why did I print it?: Just because I wanted to see if it would work, AND IT DID!
Print Settings
Quality
Layer height: 0.15mm
Shell
Wall Thickness: 1.8mm
Top/Bottom Thickness: 1.8mm
Infill
Infill Density: 100%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%
Speed
Print Speed: 70mm/s.
Travel Speed: 120 mm/s.
Support
Enable Support: Yes.
Support_Placement: Touching Buildplate
Support_Pattern: ZigZag.
Build plate Adhesion
Build plate adhesion type: None
Why did I print it?: Just because I wanted to see if it would work, AND IT DID!
Print Settings
Quality
Layer height: 0.15mm
Shell
Wall Thickness: 1.8mm
Top/Bottom Thickness: 1.8mm
Infill
Infill Density: 100%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%
Speed
Print Speed: 70mm/s.
Travel Speed: 120 mm/s.
Support
Enable Support: Yes.
Support_Placement: Touching Buildplate
Support_Pattern: ZigZag.
Build plate Adhesion
Build plate adhesion type: None
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!