Solar System Lithophane Calibration Panel

IntroductionThe two models provided here are simple test prints to find out how a lithophane will turn out with a specific filament and illumination. All Lamps of the Solar System Planet Lamp Collection - 205mm³ and of the Solar System Lithophane Christmas Bauble Collection use a maximum wall thickness of 0.6mm and a maximum thickness of 2.8mm. The right side of the panel (present in both the standalone and jupiter version) shows these thicknesses with a step size of 0.2mm. The optional left side of the panel (jupiter-version) shows a small section of the jupiter lamp.Optimally, your filament-illumination combination should be very dark at 2.8mm and very bright at 0.6mm. If you print this and post a make, please also post the filament you are using in combination with the light source you've used as a guideline for other people. FilamentFilament matters. A lot! Depending on the Pigments in your filament, your lamp may have more or less contrast or a warmer or cooler color temperatu