Thingiverse
Tools
Go to Model
Solder Fume Extractor
269
Downloads
190
Likes
1
Makes
This is a fume extractor i made one to save my lungs.
What you will need is a 140mm fan,9v adapter and to print the two STL-files.
you can purchase a
140mm fan here
9V adapter
9V connector
Carbon filter
3D-printer
The first part i used a support. the second part does not need support.
Infillrate: above 10% should be fine.
Note: if you want more flow, just add one more fan! but if think its good as it is.
Please check out and subscribe on my youtube-channel
What you will need is a 140mm fan,9v adapter and to print the two STL-files.
you can purchase a
140mm fan here
9V adapter
9V connector
Carbon filter
3D-printer
The first part i used a support. the second part does not need support.
Infillrate: above 10% should be fine.
Note: if you want more flow, just add one more fan! but if think its good as it is.
Please check out and subscribe on my youtube-channel
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
