Solder Holder Stand

all parts snap togetheronly 18g of filament is neededmaximum spool width is 40mm, if you need longer one, scale the length in your slicerheight of the spool: 50mm from top of its opening to the bottom :)Printing instructions:PLA or PETG is OKyou need to print:1x LEFT1x RIGHT1x ROD1x BRACEprint orientation as per picture - no brim, no supportsI strongly recommend to print the rod SEPARATELY, or add brim if you have low bed adhesionuse max layer height possible - pictured is 0.32mm @ 0.4mm nozzleuse 4 perimeters and 15% infill (rectilinear)Version history:v1.118.2.2024added bottom brace - snaps on and fixes wobble of the standv1.026.1.2024initial release