Soldering Fume Extractor

An easy to assemble and service soldering fume extractor with a carbon activated filter. I had some leftover pc fans from my build that wanted to repurpose. This design uses no additional hardware apart from some magnets and should be quite easy to print on most printers. No supports or such are required.My Print Settingsmaterial: PLA mattelayer height: 0.2mminfill: 15% 3d honeycombwalls: 3supports: none Bill of MaterialsThese are the materials I used for the build24x magnets 6mm x 3mm (alternatively some 6mm x 6mm dowels could probably be printed using cylinderes directly in the slicer)some cables to connect the components1x 127mm x 127mm x 8mm carbon activated filter 1x usb-c decoy1x step down buck converter1x pwm pc fan controller1x 120mm 12v fanAssembly InstructionFor the electronics, I followed this excellent model's guidance https://makerworld.com/en/models/1019135-soldering-fume-extractor-usb-c-open-source. This setup works quite nicely, though some chargers/cables don't