Solo Leveling hueforge glow

Solo Leveling hueforge glow in the darkPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.4mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Glow Blue Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 4.8 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #18 (1.52mm) swap to Glow Blue At layer #23 (1.92mm) swap to Jade White for the rest.