Solo Leveling Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Blue At layer #14 (1.2mm) swap to Cyan At layer #19 (1.6mm) swap to Jade White for the rest.