Solo Leveling Kiba

Do not modify the height of this design. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 141.5x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.1mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Sky Blue Transmission Distance: 8.2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Sky Blue At layer #13 (1.12mm) swap to Ice Blue At layer #18 (1.52mm) swap to Black At layer #19 (1.6mm) swap to Red for the rest.