Some Gave It All

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.71998mmFilaments Used: #000000 PLA Bambu Basic Black Transmission Distance: 0.1 #7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2 #b7954a PLA Bambu Basic Gold Transmission Distance: 2.7 #808080 PLA Bambu Basic Light Gray Transmission Distance: 1.1 #ffffff PLA Bambu Basic Jade White Transmission Distance: 6.3This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #12 (0.68mm) swap to Dark Brown At layer #17 (0.88mm) swap to Gold At layer #22 (1.08mm) swap to Light Gray At layer #24 (1.16mm) swap to Jade White for the rest.