Slicer Discord
Somfy remote shade controller – Modello 3D stampabile da Thingiverse Thingiverse

Somfy remote shade controller

19 Download
24 Likes
0 Makes
Vai al Modello
There is a newer version of this thing here:
https://www.thingiverse.com/thing:3714544


If you own a shade or awning or curtain controlled by a Somfy remote control, and would like to control it from anywhere in the world. This is the gadget for you.

It is a simple box with a servo that pushes the buttons. In my case it controls shades in my house. The heart is an Adafruit HAZZAH ESP8266 breakout board. https://www.adafruit.com/product/2471
This board allows you to use a web browser to control it.

The "pusher" is glued using 5 minute epoxy to the servo horn. It is powered with a 5 volt wall wart. The clip is used to hold the servo in. I use a clip because the servo needs to come out in order to put the "Somfy remote" into the unit. The HAZZAH is fastened to the box using double sided sticky tape.

Once built and running you will have to determine the ip address of the HAZZAH and then use a web browser to access the web page designed into the code that is embedded into th
Fonte
Thingiverse
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Post-elaborazione
Incollaggio
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione