Son Goku (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #15 (1.28mm) swap to Ivory White for the rest. Remember if you sant to scale, do it only with x and y axis, z must be the same as original.